Yes — RoHS, REACH, Prop 65 and material compliance documents are coordinated from the resin suppliers and the molding partner, who hold the underlying data. JCH coordinates the chain and reviews it for completeness and consistency; it does not itself certify compliance or guarantee the underlying data. The first step is to name your markets, the standards that apply, and whether you need signed declarations, lab test reports, or a full material disclosure.
This page is general information, not legal advice — confirm your obligations with your compliance or legal lead.
| Standard | What it covers | What you usually provide |
|---|---|---|
| RoHS (EU 2011/65/EU) | Restricts 10 substances in EEE — lead, mercury, hexavalent chromium, PBB, PBDE and 4 phthalates (DEHP, BBP, DBP, DIBP) at max 0.1% by weight in each homogeneous material, and cadmium at 0.01% | Declaration of Conformity; test reports (IEC 62321) where required |
| REACH (EC 1907/2006) | Chemicals generally; for an article, declaring SVHCs present above 0.1% by weight, the Article 33 duty to pass that info to customers, and — separately, under the EU Waste Framework Directive — a SCIP database notification | SVHC declaration (updated as the list grows); Article 33 communication |
| California Prop 65 | Warning requirement for listed substances sold in California | Assessment + warning statement where applicable |
| Conflict minerals (3TG) | Tin, tungsten, tantalum, gold sourcing disclosure (US Dodd-Frank / SEC-driven) | CMRT declaration where relevant |
| Food / medical | Food-contact or biocompatibility (separate page) | See food-safe & medical-grade |
RoHS applies only if your product is electrical or electronic equipment (EEE) — a molded part that is not EEE, not built into EEE and not sold as an EEE spare part or cable is out of RoHS scope — while REACH is broad and reaches almost any article sold in the EU. Which others apply depends on the product and markets. In most frameworks the company that places the product on the market carries the obligation (it falls differently on manufacturers, importers, and distributors) — your compliance or legal lead confirms how it applies to you. The documentation chain is how you support it.
A declaration is a signed statement that a part conforms, based on supplier data and the bill of materials — the common baseline, accepted by many customers. A test report is lab evidence (in-house or third-party) that measured the actual substances (XRF screening for metals and bromine, wet chemistry for hexavalent chromium, GC-MS for PBB/PBDE and phthalates, per IEC 62321). Some customers or markets require test reports for specific substances; they add cost and lead time, so decide which you need up front rather than scrambling late. Getting this clear early is the single biggest time-saver in compliance paperwork.
Name the markets you sell into and the standards that apply (RoHS, REACH, Prop 65, conflict minerals, food/medical), the substances you're concerned about, whether your customers accept declarations or require lab test reports, whether you need per-lot certificates and a full material disclosure, and who the documents must be addressed to. With that, the right declarations, supplier statements, and any test reports can be collected from the resin suppliers and the molding partner — and confirmed against your obligations with your compliance or legal lead.
Can you provide RoHS, REACH, or material compliance documentation?
Yes — coordinated from the resin suppliers and molding partner who hold the data; JCH coordinates and verifies the chain, it does not itself certify. Name your markets/standards and whether you need declarations, test reports, or a full material disclosure. General information, not legal advice.
What's the difference between RoHS and REACH?
RoHS (EU 2011/65/EU) restricts 10 substances in electrical/electronic equipment (EEE) only, each under a max concentration by weight in homogeneous materials (0.1%, cadmium 0.01%) — a molded part that is not EEE, not built into EEE and not sold as an EEE spare part or cable is out of RoHS scope. REACH (EC 1907/2006) is broader — for a molded article it mainly means declaring SVHCs above 0.1% by weight, and the SVHC list keeps growing. Electronic products often need both.
What documents actually prove compliance?
A signed Declaration of Conformity (RoHS) + SVHC declaration (REACH), resin-supplier statements and a Full Material Disclosure where needed, lab test reports (IEC 62321) where required, and per-lot Certificates of Conformance traceable to the material batch.
Is a declaration the same as a test report?
No. A declaration is a signed conformance statement based on supplier data + BOM (the baseline many accept). A test report is lab measurement (in-house or third-party) — XRF screening for metals and bromine, wet chemistry for hexavalent chromium, GC-MS for PBB/PBDE and phthalates, per IEC 62321. Some customers/markets require test reports; they add cost and lead time, so plan them early.
What should I tell you to get the right documentation?
Your markets and the applicable standards, the substances of concern, whether declarations or lab test reports are required, whether you need per-lot certificates and a full material disclosure, and who the documents are addressed to — confirmed with your compliance or legal lead.
JCH Design & Manufacturing can coordinate the compliance documentation your markets require — the right declarations, supplier statements, and test reports collected from the resin suppliers and molding partner, and reviewed for a complete, consistent chain. Tell us your markets, standards, and whether you need test reports; NDA first.
Book a 30-minute call