Yes, through partners equipped for it — but "food-safe" and "medical-grade" are compliance questions as much as molding ones. Each needs three things together: a resin grade cleared for the use, a documentation chain that proves it, and process controls (cleanliness, segregation, traceability) that keep the part compliant in production. The exact requirements depend on your product and market, so the first step is to name the standard you must meet.
JCH coordinates design, tooling, production and the documentation chain through a manufacturing network — the molding partner your program qualifies must hold whatever ISO 13485 / food-safety certifications it requires and provide the material and test documentation; JCH coordinates and verifies that chain, it does not itself certify compliance. This page is general information, not regulatory advice — confirm the applicable requirements with your regulatory or quality lead.
| Food-contact | Medical-grade | |
|---|---|---|
| Typical standards | FDA 21 CFR 177 (US), NSF (food equipment), EU 1935/2004 & 10/2011 | USP Class VI and/or ISO 10993 biocompatibility; ISO 13485 quality system |
| Material | Food-contact resin AND food-contact colorant/additives | Medical-grade resin (e.g. PP, PC, COC, silicone) at the right biocompatibility level |
| Process | Clean process, no cross-contamination; sometimes NSF-audited | Often cleanroom (e.g. ISO Class 7/8), lot traceability, validation (IQ/OQ/PQ) |
| Proof | Material certs; migration/extraction testing where required | Biocompatibility reports, certs of conformance, DMF/MAF reference, QMS records |
The common mistake is treating either as "just a clean part." Both are a system — material + process + paperwork — and the level scales with the use.
A food-contact part needs a resin cleared for food contact (in the US, compliant with FDA 21 CFR 177 and the relevant indirect-additive rules, often NSF/ANSI 51-certified for food-equipment materials; in the EU, 1935/2004 and 10/2011), and food-contact colorants and additives — a food-safe base resin with a non-compliant colorant is not food-safe. Depending on the use, migration or extraction testing may be needed to prove the finished part is safe, not just the raw material.
Medical-grade is stricter and depends on how the device contacts the body. It usually combines a medical-grade resin, biocompatibility to USP Class VI (a material screening test, not a device approval) and/or ISO 10993 (whose test battery scales with the contact category — surface, external-communicating, or implant — and the duration: limited, prolonged, or long-term), and a manufacturer running an ISO 13485 quality system (not always required; many non-sterile, non-implant parts don't need one), often with cleanroom molding, lot traceability, and process validation. The exact combination is set by the device classification and regulatory pathway, which your regulatory team and the FDA or notified body define. A medical-grade resin alone does not make a finished device compliant.
Ask for the specific documents your market requires before the first production lot — a documentation gap found after tooling is expensive. (See compliance documentation.)
Name the exact requirement, not just "food-safe" or "medical." State the standard (FDA 21 CFR 177, NSF, USP Class VI, ISO 10993, EU 10/2011), the application and how the part is used (what food, or what body contact and for how long), whether cleanroom molding and a specific class are needed, whether you require an ISO 13485 manufacturer, the documents you must receive, and any color or material constraints. With that, a compliant material and a partner equipped for the process and paperwork can be matched — and the requirements confirmed with your regulatory or quality lead before tooling. Any certifications come from the molding partner your program qualifies; JCH coordinates and verifies, it does not certify.
Can you mold food-safe or medical-grade plastic parts?
Yes, through partners equipped for it — but both are compliance questions: a cleared resin grade, a documentation chain, and process controls (cleanliness, segregation, traceability) together. Name the exact standard (FDA food-contact, USP Class VI, ISO 10993) and confirm requirements with your regulatory lead. General information, not regulatory advice.
What makes a plastic part food-safe?
A food-contact resin (FDA 21 CFR 177 in the US, often NSF; EU 1935/2004 & 10/2011) AND food-contact colorants/additives — a food-safe resin with a non-compliant colorant isn't food-safe. Migration/extraction testing may be needed to prove the finished part.
What makes a part medical-grade?
A medical-grade resin + biocompatibility (USP Class VI and/or ISO 10993, scaled to contact type/duration) + usually an ISO 13485 manufacturer, often with cleanroom molding, lot traceability, and validation (IQ/OQ/PQ). The device classification and regulatory pathway set the exact combination.
What documentation proves compliance?
Material certs + regulatory statements, per-lot certificates of conformance with lot traceability, migration/biocompatibility test reports where required, and (for regulated processes) ISO 13485 and IQ/OQ/PQ validation records. Get the list your market needs before the first lot.
What should I tell you to get the right compliance?
The exact standard, the application and contact (what food, or what body contact and duration), cleanroom class if needed, whether an ISO 13485 manufacturer is required, the documents you need, and color/material constraints — confirmed with your regulatory or quality lead.
JCH Design & Manufacturing can match a compliant material and a partner equipped for the cleanroom, process controls, and documentation your standard requires — and help you define the paperwork before tooling. Tell us the exact standard and the application; NDA first.
Book a 30-minute call