Answers › CAD file formats

What CAD file formats do you accept?

A 3D solid model is what a mold is built from, so a solid format is what's needed — STEP (.step/.stp) is the universal best choice, and native or Parasolid files work too. Add a 2D drawing with tolerances. The short version: send a STEP file plus a dimensioned drawing.

JCH coordinates tooling from your files through a manufacturing network; this page is general guidance, not a quote.

3D formats, best to least useful for tooling, plus the required 2D drawing

FormatTypeUse for tooling
STEP (.step / .stp)Solid, universalBest — reads cleanly from almost any CAD system
Parasolid (.x_t) / native (.sldprt)Solid, nativeExcellent if that's your system
IGES (.igs / .iges)Usually surfaces, older (last revised 1996)Accepted, but can arrive with gaps — stitched/healed before use
STL (.stl)Mesh (triangles)Prototyping / 3D print only — not a production tool
2D: PDF / DXF / DWGDrawingRequired alongside the 3D — carries tolerances, material, finish, GD&T

Why solid beats mesh

A mold is machined from the actual solid body — the smooth, continuous surfaces of the part. A STEP or native file carries that true geometry. An STL is a faceted approximation: the surface is broken into flat triangles, so curves are stepped, there's no exact geometry, and there's no tolerance data. That's perfect for a 3D printer and unusable for cutting a steel tool, because a tool built from an approximation is a tool built to the wrong shape. IGES sits in between — it can carry solids, but most IGES exports arrive as trimmed surfaces, so it sometimes imports with gaps that have to be stitched before work starts.

You need both the 3D model and a 2D drawing

They answer different questions, and tooling needs both:

The model alone tells how to make the part look right; the drawing tells which features must be held tight and which can move — and that's what the mold and the inspection plan are built around. A model without a drawing leaves tolerances to assumption, and assumptions are where parts come back wrong.

No CAD yet?

Common and fine. A physical sample, a sketch with dimensions, or a clear description is enough to start — from there a CAD model is built, or the part is reverse-engineered from a sample by scanning and modeling, then reviewed with you and turned into the STEP file plus drawing that tooling needs. You don't have to arrive with production-ready CAD; the model-building is part of the work, not a prerequisite you solve alone first. (See prototype vs production tooling.)

One practical note

Name the file with a revision (for example part_revB.step), so the tool is built from the version you mean — the same revision discipline a bill of materials uses. A quietly updated model with the same filename is a common way the wrong version gets tooled. One more import cross-check catches the other classic error: a file that comes in at the wrong scale — most often a unitless STL or a DXF, millimeters read as inches or the reverse — shows up instantly against the drawing's overall dimensions, which is why the imported model is checked against the 2D before any steel is cut.

Common questions

What CAD file formats do you accept?
A 3D solid model (STEP .step/.stp is best; native .sldprt or Parasolid .x_t also work), plus a 2D drawing (PDF/DXF/DWG) for tolerances, material, and finish. IGES is accepted but older/usually surfaces (can need repair). STL is a mesh — good for a 3D print, not for cutting a production tool. Short version: a STEP plus a dimensioned drawing.

Which format is best for injection molding?
STEP, almost always — a solid format nearly every CAD package exports reliably, carrying the true geometry a mold is cut from without surface-translation errors. Native Parasolid/SolidWorks is just as good. If you export one thing, export a STEP.

Can you work from an STL file?
It starts the conversation but can't tool a production part alone — STL is a triangle mesh with faceted curves, no true geometry, and no tolerances. Fine for a 3D printer, not a steel mold. We use it to understand the part, then the real solid model (STEP/native) is built or requested before tooling.

Do you need a 2D drawing as well as the 3D model?
Yes, for anything with real requirements. The model is the shape; the drawing is the critical dimensions/tolerances, material, finish, and GD&T — what the mold and inspection plan are built around. A model without a drawing leaves tolerances to assumption.

What if I don't have a CAD model yet?
Fine — a sample, a dimensioned sketch, or a clear description starts it. A CAD model is built (or the part reverse-engineered from a sample by scanning), reviewed with you, and turned into the STEP + drawing tooling needs. The model-building is part of the work.

JCH Design & Manufacturing can work from your STEP file and drawing — or help build the model if you don't have one. Send what you have.

Book a 30-minute call