Answers › Bill-of-materials help

Can you help me build a bill of materials for my product?

Yes — a bill of materials (BOM) is the complete parts list for a product, with the quantity of each per finished unit. It covers every component — molded parts, sewn or soft goods, packaging, and purchased hardware — and JCH helps structure it from your drawings or samples so the product can be quoted, sourced, and assembled accurately, catching the gaps that cause surprise costs. The design decisions stay yours — a BOM is your product definition.

JCH coordinates sourcing and assembly against the BOM through a manufacturing network; this page is general guidance, not a quote.

What a BOM contains

Fields a BOM line can carry
FieldWhat it holds
Part number / line IDA unique identifier for each component
DescriptionWhat the part is
Qty per unit + UoMHow many per finished product, and the unit of measure (each, meters of trim, grams of adhesive)
Material / specResin and grade, fabric, or the purchased-part specification — not just "plastic" or "fabric"
Make / buy / source typeMolded, cut-and-sew, printed, or a purchased component
Supplier / mfr part numberThe source, and the manufacturer's part number for a bought item (critical for long-lead parts)
Scrap / yield allowanceExtra to budget for trim loss or rejects, so the costed quantity matches reality
NotesFinish, color, revision, special handling

A few worked lines, no prices invented — just the structure that keeps a quote honest:

Worked BOM lines (illustrative, no prices)
#PartQtyMaterialMake / buyAllowance
10Enclosure, top1 eaABS, texturedMolded (in-network)rev B
20M3×8 screw4 eaSteel, zinc-platedBuy — [supplier P/N]+2% scrap
30Main panel fabric0.4 m600D polyesterCut-and-sew+5% trim loss

The molded part, the bought fastener, and the sewn panel each have a home — the right unit, source, and allowance — so none of them goes missing from the price.

The seven core fields — and why each matters

A quick-reference grid above lists what a line can carry. These seven are the ones a BOM can't do without, and what each one is actually protecting:

The seven core BOM fields and why each matters
FieldWhat it isWhy it matters
Part numberA unique, unchanging ID for each distinct part or sub-assembly (an illustrative one might read ENC-100)Lets every system, drawing, and supplier point at the exact same item, so two similar parts never get swapped
DescriptionA short, plain-language name for the partTells a person what the line is without decoding the number — faster sourcing, receiving, and assembly
Qty perHow many of this part go into one parent, with the unit of measure (each, meters, grams)Drives the costed quantity and the purchase order; a wrong qty is small on paper and large at volume
Material / specThe resin and grade, fabric, or purchased-part specificationSets price, performance, and lead time; "plastic" can't be quoted, a named resin grade can
Make-or-buyWhether the part is manufactured (molded, cut-and-sew) or bought off the shelfRoutes each line to tooling and production or to procurement, and sets who owns it
SupplierThe source for a purchased part, with the manufacturer's part numberSurfaces long-lead and single-source risk early, and ties the line to a real, orderable item
RevisionThe version letter or number of the part and of the BOM itselfConfirms everyone is building the current design; a change bumps the revision and triggers a re-check

Single-level vs. multi-level

A single-level BOM is a flat list — every part in one table, fine for a simple product. It breaks down once the product has sub-assemblies or a module is sourced or costed on its own: a flat list can't show which parts belong to which module, so a change to a sub-assembly can't be isolated. A multi-level BOM nests sub-assemblies: a module (a housing with its inserts and hardware) has its own BOM, and the top level lists that module as one line that expands into its own parts. Multi-level mirrors how the product is actually built, shows where each part belongs, and lets a sub-assembly be sourced or costed on its own — the right structure once a product is built from modules.

Multi-level bill of materials structure for a molded enclosureA multi-level BOM tree: the finished enclosure unit breaks into a housing sub-assembly and a packaging set, which break into molded parts and purchased components, and the molded housing and lid both draw on ABS resin as the raw material.

Enclosure unit - finished good

Housing sub-assembly

Packaging set

Housing - molded part

Lid - molded part

M3x8 screws, qty 4 - purchased

Rating label - purchased

Shipping carton - purchased

Foam insert - purchased

ABS resin - raw material

A multi-level BOM for a simple molded enclosure: the finished unit (navy) breaks into a housing sub-assembly and a packaging set (gold), each of which expands into molded parts and purchased components (blue), and the molded housing and lid both draw on ABS resin as their raw material (cream). The top level lists each sub-assembly as a single line that expands into its own parts — illustrative structure, not a real product.

The gaps that cause surprise costs

A part missing from the BOM is a part missing from the quote — it shows up later as an unplanned cost. The usual omissions:

Why revision control matters

A BOM isn't written once. As the product changes, a version-controlled BOM means a component change triggers a documented re-check and re-price, rather than a silent substitution that nobody quoted. It's also what keeps the quote and the eventual build working from the same, current definition — the single source of truth that sourcing, assembly, and cost-down all read from.

What we need to help

Whatever you have: drawings or CAD for the molded parts, a sample if one exists, the components you already know (with any part numbers or suppliers), how the product is used, and your expected annual volume. A rough parts list is a fine starting point; from there the BOM is structured, the gaps flagged, make-versus-buy marked, long-lead items identified, and the whole thing kept under revision control.

Common questions

Can you help me build a bill of materials?
Yes — a BOM is the complete per-unit parts list (molded parts, purchased components, fasteners, labels, packaging, with quantities). JCH structures it from your drawings or samples so the product can be quoted, sourced, and assembled accurately, and flags the gaps. The design decisions stay yours. Send what you have — drawings, a sample, or a parts list to build from.

What goes into a bill of materials?
Per line: part number, description, quantity per unit, material/spec, make-or-buy, source/supplier, and notes (finish/color/revision). The forgotten parts — fasteners, adhesives, labels, packaging — belong on it too, because a part missing from the BOM is a part missing from the quote.

What's the difference between single-level and multi-level?
Single-level is a flat list (fine for a simple product). Multi-level nests sub-assemblies: a module has its own BOM and appears as one line at the top level. Multi-level mirrors how the product is built and lets a sub-assembly be sourced or costed on its own.

Why does an accurate BOM matter for a quote?
The quote is priced from the BOM — complete BOM, accurate quote; a missing part or wrong quantity makes the price wrong and surfaces later as an unplanned cost. It also drives make-or-buy, flags long-lead items, and (under revision control) prevents silent substitutions nobody priced.

What do you need to help with my BOM?
Drawings/CAD or a sample for the molded parts, the components you already know (part numbers/suppliers if any), how the product is used, and expected annual volume. Even a rough list works — it's structured, gap-flagged, make-vs-buy marked, long-lead items identified, and revision-controlled from there.

JCH Design & Manufacturing can structure your BOM and flag the gaps before quoting. Send your drawings, a sample, or even a rough parts list.

Book a 30-minute call