Answers › Assembly, sub-assembly & kitting

Does JCH handle assembly, sub-assembly, and kitting?

Yes — JCH coordinates assembly, sub-assembly, and kitting through a manufacturing network, so you can receive a finished or near-finished product instead of loose parts to put together yourself. It lowers landed cost and simplifies supply: assembly labor at the source is usually cheaper, you manage one supplier instead of several, and everything ships consolidated.

JCH coordinates these services through partner facilities; this page is general guidance, not a quote.

The three, and how they differ

Subassembly, kitting, and full turnkey assembly: what each one is and when to choose it.
ServiceWhat it isWhen you want it
Sub-assemblyA module built up (e.g. a housing with inserts and hardware fitted, or a cable harness terminated and continuity-tested) and delivered as one proven unit — not the finished product.When the module feeds a larger build, yours or ours, and you want it verified as a unit before it reaches final assembly.
KittingThe right components grouped and packaged together as a kit — not joined; verified by count and completeness rather than by function.When a downstream line or distributor adds parts, or needs ready-to-use/ready-to-sell component sets stocked, often one kit per end unit.
Full (turnkey) assemblyParts joined into a complete, working product — functionally and fit-checked, then packaged as the finished item.When the end user needs it ready to run out of the box and you want one supplier accountable for the whole unit.

Many programs use all three: sub-assemblies built up, combined into a final assembly, and kitted with accessories for retail.

Choosing between them: if the end user needs it ready to run, assemble; if a downstream line — theirs or a distributor's — adds parts or needs to stock components, kit; if the module feeds a larger build, sub-assemble. Two limits worth stating plainly: a kit is not functionally tested (it's a verified set of parts, not a working unit), and a sub-assembly is not a final assembly (it's one proven module, not the finished product).

Where subassembly and kitting fit in the assembly flowParts flow through a coordinated build: incoming inspection and first-article check, then subassembly modules and per-unit kitting both feed final assembly, which is tested and QC-sampled to an AQL before consolidated pack-out and shipping.

Molded + purchased parts

Incoming inspection + FAI

Subassembly build: modules fitted up

Kitting: right parts grouped per unit

Final assembly: line-side feed

Test + QC: sampled to AQL

Pack-out + ship: consolidated

Where subassembly and kitting fit in the build: molded and purchased parts clear incoming inspection and a first-article check (FAI), then subassembly modules and per-unit kits both feed final assembly, which is tested and QC-sampled to an AQL before consolidated pack-out and shipping.

How assembly across a network is coordinated

This is where a coordinated network differs from buying parts from several shops and assembling them yourself:

Operations included

It arrives inspected and packaged — not a bag of parts that still needs a second operation at your end.

Why assemble at the source

The trade-off: it concentrates the work with one source, so clear documentation and quality criteria matter. Assembled units are sampled to an agreed quality level — an AQL plan sets how many units out of a lot are checked and the accept/reject limit, with major defects (a unit that won't work) held to a tighter limit than minor ones (a cosmetic blemish) — and run to documented work instructions so every unit goes together the same way. Kits are verified differently: by count and completeness, sometimes check-weighing the pack, rather than by function.

Regulated assemblies

A complex regulated assembly — a medical device, or a product needing certified electronics — needs the right partner and the right process controls, and the certification is the product owner's, not something JCH grants. JCH coordinates the assembly to your specification and controls; it doesn't certify a regulated product it doesn't own. For a simple consumer or industrial product, assembly and kitting at the source is straightforward; for a regulated one, we scope the controls up front.

What we need to scope it

The bill of materials (every molded and purchased component), the assembly drawing or work instructions (how it goes together, in what order), the quality criteria (what a good unit looks like and how it's checked), the packaging spec (how it ships or presents at retail), and your annual volume. For regulated products, include the controls and any certification the assembly must support. With that, the operations, inspection plan, and packaging are scoped together — and sub-assembly vs. full assembly vs. kitting chosen to fit how you actually use the product.

Common questions

Does JCH handle assembly, sub-assembly, and kitting?
Yes — coordinated through a manufacturing network, so you receive a finished or near-finished product instead of loose parts: joining parts into a working unit, building modules that feed a larger assembly, and grouping components into ready-to-use/sell kits. Because the parts, components, and assembly are coordinated together, incoming inspection and the final-unit check sit under one program instead of being split across vendors. The appeal is landed cost, one accountable supplier, and consolidated shipping.

What's the difference between assembly, sub-assembly, and kitting?
Assembly = parts joined into a complete working product. Sub-assembly = a module built up and delivered as one unit to feed a larger assembly. Kitting = components grouped/packaged together (not joined) so they're ready to use, sell, or assemble downstream — verified by count and completeness, not function. Many programs use all three.

What assembly operations are included?
Mechanical fastening (screws/snaps), ultrasonic welding or adhesive for permanent joints, threaded/heat-staked inserts, fitting hardware/gaskets/seals, functional and fit checks, labeling/serialization, and retail or protective packaging (including multi-SKU kits). Components are checked on arrival (incoming inspection) and the BOM is revision-controlled, so it arrives inspected and packaged — not a bag of parts needing a second operation.

Why assemble at the source instead of doing it myself?
Lower assembly labor at the source, one supplier instead of several, one consolidated shipment (cheaper freight + customs), and QC on the assembled unit — sampled to an AQL plan with major defects held tighter than minor. The trade-off is concentrating the work with one source, so keep documentation and quality criteria clear.

What do you need to scope an assembly or kitting job?
The bill of materials, the assembly drawing/work instructions, the quality criteria, the packaging spec, and annual volume (plus controls/certification for regulated products). Then the operations, inspection plan, and packaging are scoped together, and sub-assembly vs. full assembly vs. kitting chosen to fit the product.

JCH Design & Manufacturing can coordinate assembly, sub-assembly, or kitting for your product. Send the bill of materials and assembly instructions.

Book a 30-minute call