JCH Design & ManufacturingJCH Design & Manufacturing BBB Accredited BusinessBook a 30-min call
Last updated 2026-11-10  ·  By the JCH engineering team

Moving injection mold tooling to a new supplier: how a tool transfer works

Short answer: A tool transfer works when it is done in order: prove ownership in writing, audit the tool and its records where it sits, collect retained good parts, crate it with its inserts and drawings, then re-sample at the new supplier, measure the T1 parts against the drawing and approve a first article before production restarts.

Filed under Molds and tooling

Tariff changes have many buyers asking whether to move tools that have run at one shop for years. The steel is the easy part to move. What gets lost is everything around it: the process settings, the repair history and the parts that proved the tool was good. A transfer that keeps those is a resampling job. One that loses them can turn into a rebuild.

What to ask the current shop, before anyone mentions the move

  • Ownership and release. Confirm in writing that you own the tool and that the shop will release it. Settle open invoices first; an open balance is a common reason a tool does not leave.
  • The mold record. Shot count, maintenance and repair history, and every engineering change made to the steel.
  • The process setup sheet. Press size, temperatures, pressures, cycle, and the resin grade and drying settings the tool actually runs on.
  • The latest dimensional report and a set of retained good parts from the last lot.
  • Drawings and spares. Part and tool drawings, the insert list, spare components, and the hot runner controller details if the tool has one.

Collect what you can while the relationship is normal. Requests made after a move is announced tend to go slower.

The pre-move audit

Inspect the tool where it sits, before it is crated: parting line, vents, gates, cooling channels, ejectors, slides and wear surfaces. Photograph everything and keep a few last-shot parts. Damage recorded before shipping is a fact; damage found after arrival becomes an argument.

T0, T1 and resampling at the new supplier

  1. Fit the press before the tool arrives: platen size, tonnage, nozzle and ejector layout.
  2. T0 trial: the first shots to prove the tool runs in the new press.
  3. Tune the process, starting from the old setup sheet.
  4. T1 parts are measured against the drawing and compared with the retained good parts.
  5. Correct and repeat until the parts match, recording any change to the steel.

Shops use the T0 and T1 labels differently, so agree in writing what each trial has to show.

First article and documentation

A change of factory is one of the standard triggers for a new first article inspection. Approve it before production restarts, then update the mold record with the new location, the trial results and any repairs, so the next person who touches the tool has the history.

Customs paperwork

Moving a tool can change how the finished parts are classified and declared, and the value of a tool a buyer supplies can count as an assist. Those are customs questions with their own rules. Ask a licensed customs broker before you plan around a tariff change.

What happens to my mould, its records and its maintenance when I switch factories?

Ownership stays with whoever the signed agreement names, but custody changes hands, so record each handover. Before the tool leaves, get a written release, the shot count, the maintenance and repair log, the process sheet and last-shot samples. They travel with the steel to the new custodian, and the tool is treated as unproven until it is re-sampled and a first article is approved. On a JCH program, storage, maintenance and transfer terms are set in your quote.

  • Who holds the tool. Name the custodian at each stage: the old shop, the carrier in transit, then the new partner factory. The custody record changes hands on a dated sign-off. Ownership does not change because custody does.
  • Records that travel with the steel. Shot count at release, the maintenance and repair log, the process sheet, last-shot samples, and the inserts and spares inventory. These match the fields in the mold record template. A tool that arrives without its record is treated as unproven.
  • What happens at the old factory. Get a written release, the retained-sample handover and a disposal notice period. Check for anything left behind or partly owned, such as family inserts or a shared mold base. The tooling agreement clauses cover what to put in writing.
  • The duty question at the switch. When the steel crosses a border, the mould is entered as goods in its own right (HTS 8480.71). If the buyer supplied it to an overseas molder, its value can also count as an assist on the parts it makes (19 U.S.C. 1401a). Tell your customs broker either way.
  • Tool life after a move. Compare the shots remaining with the class the tool was built to. If the record shows the tool near the end of its life, weigh a rebuild against a move. The mold transfer checklist lists the checks.

On a JCH program

Jack plans the audit, resampling and first article with vetted partner factories, and the tool gets a nameplate and a custody record. Storage, maintenance and transfer terms are set in your quote. The mold transfer checklist is the printable version of the steps above.

Straight answers

What should I ask my current molder before moving a mold?

Written ownership and release, the mold record with shot count and repair history, the process setup sheet, the latest dimensional report, retained good parts, drawings and spare components.

What is the difference between T0 and T1 samples?

T0 is usually the first trial that proves the tool runs in the new press. T1 parts come after process tuning and are measured against the drawing. Shops use the labels differently, so define them in writing.

Do I need a new first article inspection after a mold transfer?

Yes. A change of factory is a standard trigger for a new first article, even when nothing on the tool changed.

Can the current factory refuse to release my mold?

It can delay a release when ownership is not documented or invoices are open. Written ownership and settled balances are the best protection. This is not legal advice.

What does JCH charge to take over a transferred tool?

Storage, maintenance and transfer terms are set in your quote, after the tool and its records have been reviewed.

JCH is a trade name of WJH & JCH Global Trading LLC. Jack works with vetted partner factories and does not own the plants.

mold transfertool transferT1 samplesfirst articlemold record

How this note was made: researched and drafted with AI assistance, checked against the sources listed below and edited by the JCH engineering team.

Have something you need made?

Bring an idea, a sketch, a sample or a finished product. Jack reads every inquiry himself.

Book a 30-min call