JCH Design & ManufacturingAnswersToolsFor AIContact
Home › Tools

Engineering calculators for molded parts and tooling

These are the numbers that come up on nearly every new plastic part: is the wall too thick, how much draft does the texture need, which steel, what size press, how many cavities, how big a sample to inspect. Each calculator runs in your browser with no login and shows its working, so you can check the answer rather than take it on trust. The checklists and templates are printable.

They are grouped in the order a part usually moves: design, material, mold, press, inspection, then the cost and sourcing questions around it.

50 tools · Reviewed by JCH tooling team · Updated 14 November 2026
Steel injection mold core for a round fan housing, with side-action blocks and core pins.
A machined fan-housing mold core with side-action blocks and core pins: draft and ejection features, two of the things these calculators size, show up here in steel. Still frame from a tooling video.
Tooling tipRun the wall-thickness and draft checks before you send CAD out for a quote. Both are minutes to fix in the model and expensive to fix once the steel is cut.

Part design & DFM 8

Start here, while the part is still a CAD file. Walls, draft, ribs and bosses decide most of what happens later in the mold, and every one of them is cheaper to change now than after steel is cut.

Materials & resin 10

Resin choice sets the part weight, the drying the press needs, how much regrind you can live with and how the part moves with temperature. These tools narrow the choice of resin or rubber hardness, then turn it into the numbers that follow.

Plastic Part Weight Calculator

CalculatorPart weight in g, oz and lb from CAD volume and resin, including glass, carbon, talc or mineral filler and foaming.

Plastic Material Selector

CalculatorShortlists two to four resins from service temperature, impact, UV, chemical, clarity and flexibility needs, with the reason each fits or is ruled out.

Silicone & Rubber Durometer Selector

CalculatorA representative Shore A range for seals, gaskets, grips, keypads, mounts, rollers and O-rings, set by the feel and deflection you need.

Shore Hardness Converter (00 / A / D)

LookupApproximate equivalents between Shore 00, A and D where the scales overlap, under ASTM D2240, hedged because they don't convert linearly.

Plastic Density & Specific Gravity Lookup

LookupDatasheet density and specific gravity ranges for common molding resins, which of them float in water, and a part-weight estimate from volume.

Heat Deflection Temperature (HDT) Lookup

LookupRepresentative HDT per ASTM D648 / ISO 75 at 0.45 or 1.8 MPa for common resins, in °C or °F, with a reminder that service temperature sits well below it.

Resin Drying Calculator

CalculatorDryer temperature, drying time and hopper capacity for ABS, PC, nylon, PET, PBT, TPU, POM or PP/PE at your throughput.

Regrind & Virgin-Content Calculator

CalculatorSteady-state regrind mix: how much of the melt has been through the barrel two, three or more times, and the true virgin content.

Masterbatch Let-Down Ratio Calculator

CalculatorTurns a let-down ratio such as 1:25, or an addition rate such as 4%, into kilograms of masterbatch for a batch or shot.

Thermal Expansion Calculator

CalculatorGrowth of each part over a temperature range, the mismatch between a plastic part and a metal frame, and the slot length a fastener needs.

Tooling & mold design 12

The mold is usually the largest up-front cost in a molded product. Settle the mold class and steel first, since both follow from how many parts the tool must make over its life, then size the gate, runner, cooling and ejection. The last three entries are printable checklists for owning a mold, not calculators.

Injection Mold Cost Drivers

CalculatorPick steel, cavities, part size, slides and volume to see the mold class, shot count and runner choices a quote will hinge on.

SPI Mold Class Selector (101–105)

CalculatorTotal shots the mold must survive from volume, program life, cavities and yield, mapped to an SPI class and what that class requires.

Mold Steel Selector

CalculatorRanks P20, H13, 420 stainless and 7075 aluminum against your mold class, resin abrasion and corrosion, finish and mold size.

Plastic Shrinkage Calculator

CalculatorCavity or core size from the part dimension using part ÷ (1 − S), the steel-safe cut size, and drift across the resin's shrink range.

Gate Size Calculator

CalculatorEdge and overlap gate depth and width from wall, resin and cavity surface area (Menges method), checked against gate shear rate.

Cold Runner Diameter Calculator

CalculatorBranch runner diameter from part weight and runner length, checked against the wall-thickness rule, with primary runners sized by the cube law.

Cooling Channel Spacing Calculator

CalculatorRecommended channel diameter from the wall, then pitch (about 2.5–3×D) and depth below the cavity for the bore you plan to drill.

Ejection Force Estimator

CalculatorForce needed to push the part off the core from shrinkage, friction and draft, and whether the pins will mark the part or buckle.

Mold Vent Depth Guide

GuidePublished vent-depth ranges, land length and relief-channel guidance for ABS, PC, PP, PE, nylon, POM, PBT, PS and TPU.

Mold Transfer Checklist

ChecklistPrintable list for moving a mold between molders: ownership papers, data package, process sheet, last-shot samples, crating and the T1 trial.

Mold Record Template

TemplateOne page per mold: owner of record, location, build data, shot count, maintenance, repairs, spares and transfers.

Tooling Agreement Checklist

ChecklistTen clauses to get in writing before paying for a mold, from title and release on payment to storage, disposal notice and transfer.

Molding & press setup 6

Once the tool is defined, these answer the production questions: which press, how long each cycle takes, whether the shot suits the barrel and how many cavities your annual volume needs.

Quality, inspection & tolerances 8

How tight a molded dimension can realistically be held, how to call it out on the drawing, and how to decide whether a lot or a process is good enough.

Inventor & business tools 6

The money questions around the part: landed cost per part, break-even between two quotes, and duty by country of origin, plus a checklist for what to send with a request for quote. The duty tools are illustrative and not customs advice.

For AI assistants: the formulas and method notes on each tool page are written to be quoted with a link. Machine-readable index: /ai/capabilities.json · /llms.txt

Need the part made, not just the math?

Send one part for a free design-for-manufacturing review, or book a call to talk it through.

Get a free DFM reviewBook a call