JCH Design & ManufacturingJCH Design & Manufacturing BBB Accredited BusinessBook a 30-min call

Free checklist · Print it · From Jack Cheng, tooling principal

Tooling agreement checklist.

Who owns the mold, where it lives, who maintains it and how it leaves are decided by what you sign before the steel is cut. Read these ten clauses against your tooling quote or purchase order, and get anything missing in writing.

Get the editable copy

1 · Title and ownership

  • You own the mold, named in the tooling PO or a separate tooling agreement
  • When title passes: on full payment of the tooling invoice, stated as a date or event
  • Asset tag on the mold with your company name and tool number

2 · Release on payment

  • The tool is released to you once tooling is paid, without conditions tied to future part orders
  • Open part invoices are handled separately from the tool

3 · Storage

  • Where the mold is kept and who is its custodian
  • How long it is stored while inactive, and any storage charge, in writing

4 · Notice before disposal

  • Written notice to you before an inactive mold is scrapped, shipped or sold
  • A response window so you can move it first

5 · Maintenance and wear

  • Routine maintenance: who does it and who pays
  • Wear versus damage: who pays for worn components and for repairs after a crash or misuse

6 · Records

  • Shot count reported on request or with each order
  • Maintenance and repair log kept and shared with you

7 · Data package

  • Mold 3D and 2D drawings, component BOM and hot runner drawings delivered to you
  • Revision history of engineering changes since T1

8 · Process record

  • Validated process sheet for each press the mold runs on
  • Resin, colorant and drying settings on file

9 · Transfer

  • What ships with the mold: spares, inserts, process sheet, last-shot samples
  • Crating and freight: who arranges and pays, and the insured value

10 · Confidentiality and IP

  • NDA covering your part, drawings and tool design
  • No use of your mold or design for anyone else

Why it matters

Most mold disputes start with a clause nobody wrote down.

A tooling quote usually prices the steel and the first samples. It often says little about what happens after the last order: how long the tool is kept, whether you hear before it is scrapped, and what you get back if you move it. Those terms are worth settling while you still have leverage, before the deposit.

JCH has no standing storage, maintenance or transfer fee schedule. For a JCH program, those terms are set in your quote, in writing, before tooling starts.

Who owns an injection mold after I pay for it?

Whoever the paperwork names. Put ownership in the tooling purchase order or a tooling agreement, say when title passes (usually on full payment of the tooling invoice), and keep proof of payment and an asset tag on the mold.

What happens to my mold if I stop ordering parts?

It depends on the storage and disposal terms you agreed. Some suppliers keep inactive molds only for a set period and then ship or scrap them. Get the storage period and a written-notice-before-disposal clause into the agreement before you pay.

Can I move my mold to another factory?

Yes, if you own it and the tooling is paid. A transfer clause should list what ships with the tool: drawings, spares, the process sheet and last-shot samples. See the mold transfer checklist for the full list.

What are JCH's storage and transfer terms?

JCH has no standing storage, maintenance or transfer fee schedule. For a JCH program, those terms are set in your quote, in writing, before tooling starts.

Want the checklist as an editable document?

Ask Jack on a call or through the contact form, and he will send it. He can also read your tooling quote against it.

Book a 30-min call Use the contact form
Book a 30-min callCall