JCH Design & ManufacturingJCH Design & Manufacturing BBB Accredited BusinessBook a 30-min call

Free template · Print it · From Jack Cheng, tooling principal

Injection mold record template.

A mold you own is an asset, and an asset needs a record. Keep one page per tool with who holds it, what it is made of, how many shots it has run and what has been done to it. When the tool needs repair or has to move, the record is what saves the program.

Email me the PDF

1 · Identity

  • Tool number and asset tag
  • Part number and revision it molds
  • Cavities and family layout
  • Owner of record and proof-of-payment reference

2 · Location

  • Current custodian: company, contact and address
  • Date it arrived there
  • Storage terms agreed with the custodian (period, notice before disposal)

3 · Build data

  • Mold base and steels, with hardness
  • Hot runner make, zones and controller settings
  • Drawing set: revision and where the files are kept

4 · Process

  • Resin and colorant grade and supplier
  • Press tonnage and shot size used
  • Validated process sheet: reference and date

5 · Shot count log

  • Date, shots this run, running total
  • Planned service interval in shots

6 · Maintenance log

  • Date and shot count at service
  • What was done: clean, polish, replace, adjust
  • Who did it

7 · Repairs and changes

  • Repairs after damage, with cause
  • Engineering changes: what changed and the new revision

8 · Spares and inserts

  • Spare inserts, pins and components on hand
  • Where they are kept

9 · Quality references

  • Last first-article or dimensional report
  • Golden sample: where it is kept

10 · Transfer history

  • Each move: from, to, date
  • Re-qualification result after each move

Shot count and maintenance log

DateShots this runRunning totalWork done (clean, polish, replace, repair)By

Why it matters

The steel outlasts the people who remember it.

Molds run for years and change hands between buyers, engineers and factories. When nobody wrote down the shot count, the last repair or which revision the tool is cut to, every service and every transfer starts with guesswork. One page per tool, kept current, fixes that.

JCH has no standing storage or maintenance fee schedule. For a JCH program, who keeps the mold, who maintains it and how its record is shared are set in your quote, in writing.

What should an injection mold record include?

Identity (tool number, asset tag, part and revision, cavities, owner of record), location and custodian, build data, the process reference, a shot count log, a maintenance log, repairs and engineering changes, spares on hand, quality references and transfer history.

Why track a mold's shot count?

Shot count tells you how much life the tool has used and when it is due for service. It is also what a new molder asks for first when a mold moves.

Who should keep the mold record?

You, as the owner, should hold a copy even if the molder keeps the working log. Agree in writing that the custodian shares the shot count and maintenance log with you.

Want the template as an editable sheet?

Ask Jack on a call or through the contact form, and he will send it. He can also help you fill it in for a mold you already own.

Book a 30-min call Use the contact form
Book a 30-min callCall