JCH Design & ManufacturingJCH Design & Manufacturing BBB Accredited BusinessBook a 30-min call
Last updated 2026-11-10  ·  By the JCH engineering team

Single-cavity vs multi-cavity molds: how many parts per shot?

A single-cavity mold makes one part per shot, so it costs less to build and is simpler to run and change. A multi-cavity mold makes several identical parts per shot, so it costs more upfront but lowers the cost of each part once volume is high and the design is stable.

Filed under Molds and tooling

Short answer: Start with one cavity when volume is modest, the part is large or complex, or the design may still change. Move to multiple cavities when demand is predictable and high enough that the lower part cost pays back the larger tool. Cavity count is a payback calculation, not a badge.

How many cavities should my first mould have?

Usually one. A single-cavity first tool costs less, is easier to correct, and proves the design and the process before you multiply them. Choose more cavities when the design is stable, demand is firm, and the cost per part matters more than the tool cost. Many programs add a multi-cavity tool once volume is proven.

How much does one extra cavity add to mould cost?

There is no fixed percentage. Each added cavity needs its own cavity and core steel, more runner and cooling work, and balancing so every cavity fills the same, and it can push the tool into a larger mold base and press. The cost is paid once on the tool and the saving comes on every part, so compare both quotes.

Cavity count is one of the biggest levers on a mold quote. It changes the tool price, the press the tool needs, the cost of each part and how much is at risk when something goes wrong. Buyers are often offered more cavities than their volume justifies, or fewer than they need. This note explains how to tell.

What changes when you add cavities

A single-cavity tool fills one part each cycle. A multi-cavity tool fills two, four, eight or more identical parts at once through a shared runner. RPWORLD notes that single-cavity tools dominate early development because of their lower upfront cost, shorter build and flexibility, while multi-cavity tools suit higher volumes of simple, uniform parts. They add an important caution: cavity count is not set by order size alone; geometry, tooling risk and return on investment matter too.

More cavities do not mean a proportional drop in cost. A bigger tool may need a larger press, a longer cycle to cool everything, and more inspection, because every cavity has to be measured and each one can drift on its own.

Single-cavity vs multi-cavity at a glance

Single-cavityMulti-cavity
Upfront tool costLowerHigher; more steel, runner and cooling work
Cost per partHigher at volumeLower at volume
Output per cycleOne partSeveral identical parts
ConsistencyOne cavity to controlCavities must be balanced and checked separately
Press neededSmallerLarger clamp and shot size
Design changesOne cavity to modifyEvery cavity must be changed
If a cavity is damagedThe tool stopsThe cavity can often be blocked off and the rest run, after re-tuning
Typical fitPrototypes, low volume, large or complex partsHigh, predictable volume of small, simple parts

Doing the payback math

The comparison is simple to set up. Take the extra cost of the multi-cavity tool and divide it by the saving per part. The answer is the number of parts at which the bigger tool pays for itself. If your lifetime forecast is well above that number, more cavities make sense. If it is close, or your forecast is a hope rather than an order book, start smaller.

Do the math with real quotes for both options, at the same resin and the same quality level. Count the press rate each tool needs, because a larger press costs more per hour. And count the inspection: four cavities means four sets of measurements at first article.

When to choose which

Choose a single cavity when

  • Volume is low or demand is still unproven.
  • The part is large, thick or complex, with side actions or tight features.
  • The design may change after first customers handle it.
  • You want the lowest upfront tooling spend and the simplest first article.

Choose multiple cavities when

  • The design is frozen and demand is steady and high.
  • The part is small and symmetrical, so cavities fill evenly.
  • The saving per part, times your realistic volume, clearly beats the extra tool cost.

A common path is to start with a single-cavity tool, prove the design and the demand, then build a multi-cavity production tool. If you also need different parts in one tool, that is a family mold, compared in family mold vs single-part mold.

What to send for a quote

  1. CAD of the part, with cosmetic faces and critical dimensions marked.
  2. Resin grade and color.
  3. Annual volume and expected product life, honestly estimated.
  4. A request to quote more than one cavity count, so you can compare.
  5. Ownership terms for the tool, in writing.

On minimums, Jack's rule for his lines is that a multi-cavity tool needs more volume to make sense, or you pay a machine fee for a short run; see minimum order quantity: what is really negotiable. How cavity count drives the tool price is covered in what an injection mold really costs, and a free DFM review can flag geometry that will not balance across cavities.

Straight answers

What is a multi-cavity mold?

A multi-cavity mold has two or more identical cavities, so it makes several copies of the same part in each machine cycle, fed by a shared runner.

Is a multi-cavity mold cheaper?

Per part at high volume, usually yes. Upfront it costs more, and it may need a larger press and more inspection. Whether it is cheaper overall depends on your lifetime volume.

How many cavities should my mold have?

Divide the extra cost of the larger tool by the saving per part to find the payback quantity, then compare that with your realistic lifetime volume. Part size, geometry and press availability also limit the count.

Do all cavities in a multi-cavity mold make identical parts?

They are meant to, but each cavity can vary slightly. Cavities are usually numbered on the part, measured separately at first article, and balanced through runner design.

Can I start with one cavity and add more later?

Yes. Many programs prove the design and demand on a single-cavity tool, then build a multi-cavity production tool once volume justifies it.

single cavity moldmulti-cavity moldcavity countinjection moldpart costrunner balance

How this note was made: researched and drafted with AI assistance, checked against the sources listed below and edited at JCH Design & Manufacturing.

Have something you need made?

Bring an idea, a sketch, a sample or a finished product. Jack reads every inquiry himself.

Ask for time with Jack